Back to Blog
![]() ![]() Setting a static IP: Computers have IP addresses that essentially are an identification number that tells the network which computer to communicate with.This will open up a new window with all the task settingsĪ few things are necessary to make sure your server will connect to other computers on the network as well as your Haas machines: Open Task Scheduler – this is an app on your Windows PC, and you can find it just by searching in the Taskbar.Setting up an automatic restart task avoids needing to manually reboot the computer because something went wrong. Especially with a small Windows PC resources can be used up quickly, and the longer a computer is left on the more chance there is that it will slow down, crash, or cause other issues. ![]() Auto Reboot: Another step that isn’t totally necessary, but setting your server up to automatically reboot can save you from unwanted crashes or unreliability down the road.We also set our screen settings to never as the monitor for our server is typically turned off. This will periodically take down or cause issues with NetShare, so to disable it go to Settings > System > Power & Sleep and make sure that both of your sleep settings on the page are set to Never. Power & Sleep Settings: It’s important that the PC you’re using does not go to sleep.Take a look at this tutorial to bypass the login screen in Windows 10. This allows everything on the computer to load into Windows and while not totally necessary for NetShare can be important for other programs to run if using the PC as a full-fledged server. For our dedicated server we prefer to automatically login to Windows when it restarts. Bypass login on startup: This is just a preference – and if you’re setting your personal computer up as a network drive then you can skip this step as you more than likely want a password on your machine.We’re going to assume you have a brand new Windows 10 machine – if not, that’s okay! These settings can still be changed on an already setup PC, and some of them are not completely necessary. We prefer a standalone server just to avoid any possible network slowdowns, restarts, or other use of the computers resources that may hinder server performance due to the PC being used for something else. It’s also okay to use the computer you already have! Especially for smaller shops, setting up NetShare on yours or another employee’s computer is the exact same process. Small, inexpensive Windows PCs are plentiful and work great, which is why we recommend this option. Using a Linux based operating system is doable, but not recommended as setup is much more complicated. ![]() Windows is recommended as setup is the simplest, however Mac is not much more difficult. Not much storage is needed due to the relatively small size of gcode files, and more can always be added via a USB drive. It doesn’t need to be anything special – we recommend wired internet, but other than that even the most basic PC will work. If you’re a larger shop, we recommend a dedicated computer for this ( we use this small Windows PC). ![]() The first thing you’ll need is a computer to host the NetShare server. We’ll also cover a few steps that make your Windows computer running NetShare more like a server and add increased reliability. This tutorial walks through how to set up NetShare on a Windows 10 PC (although setup on any version of Windows is similar) and even covers some of the “network configuration failed” or similar errors you may see. This will act as a server that communicates between the computer you run your CAM software on and the Haas control. In this tutorial we’ll set up a network drive on a Windows PC. The ability to post gcode from any computer to any of our Haas machines saves time and effort, and while it may not seem necessary to set up NetShare once you do there really is no going back. Haas NetShare is a feature we use a ton in the shop. ![]()
0 Comments
Read More
Leave a Reply. |